Kleen Spa Stabilised Chlorine Granules (1/5/10Kg)
Tax included. Shipping calculated at checkout.
Kleen Spa Stabilised Chlorine Granules – the perfect solution for maintaining your pool or spa with a consistent supply of active chlorine. These granules effectively eliminate bacteria and potentially harmful organisms, all while being quick to dissolve and minimally impacting pH levels.
Instructions for Spa:
1. Keep the pH level within the recommended range of 7.2–7.6. If it falls outside this range, make necessary adjustments.
2. Maintain free chlorine levels between 3–5mg/l (ppm) for your spa. For new or recently drained spas, begin with an initial dose of 20mg/l (ppm) of free chlorine. Let this circulate for at least 2½ hours.
3. In case the water temperature is above 20°C, apply the product directly. If the temperature is lower or uncertain, pre-dissolve the product at a rate of 10g per 0.2 gallons (1 litre) of water. Ensure complete dissolution and add the solution while the pump(s) are active.
4. If needed, reapply the dose to achieve the desired free chlorine levels.
Instructions for Pool:
1. Maintain the pH levels between 7.2 - 7.6. Adjust as necessary.
2. Routinely maintain free chlorine between 1 - 3mg/l (ppm). For a thorough shock treatment, perform weekly or fortnightly oxidation procedures with a maximum of 10mg/l (10ppm).
3. Pre-dissolve the granules in a clean plastic container using a maximum rate of 100g per 2.2 gallons (10 litres) of water. Ensure full dissolution and add the solution to the pool while the pump is running, ideally near the water inlets.
4. Repeat the dose if needed to achieve the desired chlorine level.
5. Following product use, the pool water might appear cloudy temporarily. Keep the filtration pump running until clarity is restored.
6. After shock treatment, allow chlorine levels to drop below 5ppm before resuming bathing, and wait for at least 30 minutes.
Keep your pool or spa water pristine with our Stabilised Chlorine Granules – the simple and effective way to maintain healthy water conditions.
Tax included. Shipping calculated at checkout.
Kleen Spa Stabilised Chlorine Granules – the perfect solution for maintaining your pool or spa with a consistent supply of active chlorine. These granules effectively eliminate bacteria and potentially harmful organisms, all while being quick to dissolve and minimally impacting pH levels.
Instructions for Spa:
1. Keep the pH level within the recommended range of 7.2–7.6. If it falls outside this range, make necessary adjustments.
2. Maintain free chlorine levels between 3–5mg/l (ppm) for your spa. For new or recently drained spas, begin with an initial dose of 20mg/l (ppm) of free chlorine. Let this circulate for at least 2½ hours.
3. In case the water temperature is above 20°C, apply the product directly. If the temperature is lower or uncertain, pre-dissolve the product at a rate of 10g per 0.2 gallons (1 litre) of water. Ensure complete dissolution and add the solution while the pump(s) are active.
4. If needed, reapply the dose to achieve the desired free chlorine levels.
Instructions for Pool:
1. Maintain the pH levels between 7.2 - 7.6. Adjust as necessary.
2. Routinely maintain free chlorine between 1 - 3mg/l (ppm). For a thorough shock treatment, perform weekly or fortnightly oxidation procedures with a maximum of 10mg/l (10ppm).
3. Pre-dissolve the granules in a clean plastic container using a maximum rate of 100g per 2.2 gallons (10 litres) of water. Ensure full dissolution and add the solution to the pool while the pump is running, ideally near the water inlets.
4. Repeat the dose if needed to achieve the desired chlorine level.
5. Following product use, the pool water might appear cloudy temporarily. Keep the filtration pump running until clarity is restored.
6. After shock treatment, allow chlorine levels to drop below 5ppm before resuming bathing, and wait for at least 30 minutes.
Keep your pool or spa water pristine with our Stabilised Chlorine Granules – the simple and effective way to maintain healthy water conditions.
Tax included. Shipping calculated at checkout.
Kleen Spa Stabilised Chlorine Granules – the perfect solution for maintaining your pool or spa with a consistent supply of active chlorine. These granules effectively eliminate bacteria and potentially harmful organisms, all while being quick to dissolve and minimally impacting pH levels.
Instructions for Spa:
1. Keep the pH level within the recommended range of 7.2–7.6. If it falls outside this range, make necessary adjustments.
2. Maintain free chlorine levels between 3–5mg/l (ppm) for your spa. For new or recently drained spas, begin with an initial dose of 20mg/l (ppm) of free chlorine. Let this circulate for at least 2½ hours.
3. In case the water temperature is above 20°C, apply the product directly. If the temperature is lower or uncertain, pre-dissolve the product at a rate of 10g per 0.2 gallons (1 litre) of water. Ensure complete dissolution and add the solution while the pump(s) are active.
4. If needed, reapply the dose to achieve the desired free chlorine levels.
Instructions for Pool:
1. Maintain the pH levels between 7.2 - 7.6. Adjust as necessary.
2. Routinely maintain free chlorine between 1 - 3mg/l (ppm). For a thorough shock treatment, perform weekly or fortnightly oxidation procedures with a maximum of 10mg/l (10ppm).
3. Pre-dissolve the granules in a clean plastic container using a maximum rate of 100g per 2.2 gallons (10 litres) of water. Ensure full dissolution and add the solution to the pool while the pump is running, ideally near the water inlets.
4. Repeat the dose if needed to achieve the desired chlorine level.
5. Following product use, the pool water might appear cloudy temporarily. Keep the filtration pump running until clarity is restored.
6. After shock treatment, allow chlorine levels to drop below 5ppm before resuming bathing, and wait for at least 30 minutes.
Keep your pool or spa water pristine with our Stabilised Chlorine Granules – the simple and effective way to maintain healthy water conditions.